The 1100-1200 Bridge and Guillotine Puller is a versatile tool designed for the removal of pulleys and other components on heavy machinery.
1100 Series extractors pair efficiently with 1200 Series guillotines to maximize work efficiency.
It is important to note that, when measuring the pulley to be removed, the maximum of the guillotine should not be considered, but rather the distance between the extensions.
To carry out an external extraction, the appropriate position is with the spindle nut located under the body of the extractor.
The flat face of the guillotine must be in direct contact with the piece to be extracted to ensure effective and precise extraction.
Furthermore, the bridge of this set can be used for both exterior and interior extractions, providing great flexibility in its use.

Recommendations for use:
Make sure the spindle nut is in the proper position (under the body) before starting the external extraction.
Check that the flat face of the guillotine is well positioned against the piece to be extracted.
Do not measure the pulley to be removed according to the maximum size of the guillotine, but rather the distance between the extensions.
Use the bridge correctly to ensure accurate extraction in both indoor and outdoor configurations.
Check and adjust moving parts before each use to ensure optimal operation.

Maintenance recommendations:
Regularly clean the surfaces of the extractor and guillotine to prevent the accumulation of dirt and dust.
Apply lubricant to moving parts, such as the spindle nut, to ensure smooth movement and extend the life of the equipment.
Visually inspect sashes and extensions for wear or damage, and replace defective parts when necessary.